User's Manual

8. Establish a link between the PC and keyboard. After connection, the LED indicator will turn off to
indicate it’s paired with the PC.
9. After the Bluetooth keyboard is successfully linked with your PC, the keyboard will immediately begin
responding by pressing any key.
Note:
 You don’t have to pair the keyboard with your PC again after changing batteries. If it can’t
work, please follow the steps above to complete pairing.
 When the keyboard is not in use, please turn the power switch on the bottom of the keyboard
to “off” for power saving.
 If your desktop/notebook PC is without the Bluetooth device built-in, please prepare a
compatible Bluetooth dongle receiver to configure the Bluetooth keyboard.
¾ Disable the Bluetooth Keyboard
1. Right click the Bluetooth icon on the toolbar, and select “Show Bluetooth Device”.
2. Then, Bluetooth Device dialog box will pop up, select “Bluetooth Keyboard” and click “Remove” at the
lower left of the dialog box to remove the bluetooth keyboard device.
¾ Keyboard Power Saving/Wake up
The Bluetooth keyboard would go into sleep mode for power saving if there is no usage for 20 minutes, you
can press any key until the blue LED turn off to wake up the keyboard
¾ Important Information
 Battery Information
1. We recommend using alkaline batteries for a longer battery life.
2. Always change batteries when battery low red LED lighting appears, otherwise
the keyboard will shut down once the battery voltage is too low.
3. Don't mix different types of batteries or fresh batteries and used batteries
together. Always replace used with fresh batteries of the same type.
4. Remove batteries after long periods of non-use. Battery leakage or corrosion
may damage the device quality and cause danger.
 Battery Low Alarm
When the battery is low, the Red LED indicator on the top of the keyboard will flash per 20 seconds. Please
change batteries immediately when the Red LED indicator flashes to ensure the good usage. After you
change the batteries, the Blue LED indication will flash, you can use the keyboard after the LED flashing
disappeared.
 Important notes about Bluetooth® devices
The Bluetooth keyboard can emit radio frequency (RF) energy whenever the batteries are installed and the
power switch is turned on. Care should be taken when used around medical devices or equipment. For
specific information, consult with the product manufacturer or your physician before use. To stop
interference, power off the keyboard or remove its batteries.
The Bluetooth keyboard should not be used on any aircraft. Before boarding an aircraft, power off the
keyboard to ensure there is no RF transmission.
English