User's Manual

Ø Click on “Setup” to begin the Installation Wizard.

Ø Follow the Wizard’ s on-screen instructions to complete the installation.

Ø Restart the system.

Installing the LAN Driver

Ø Insert the DVD-ROM Driver into your DVD-ROM drive.

Ø Click “Start” and Select “Run”.

Ø Type the following: D:\Driver\LAN\Setup.exe (If D is not your DVD-ROM drive, substitute D

with the correct drive letter).

Ø Click on “Setup” to begin the Installation Wizard.

Ø Follow the Wizard’ s on-screen instructions to complete the installation.

Ø Restart the system.

Installing the TouchPad Driver

Ø Insert the DVD-ROM Driver into your DVD-ROM drive.

Ø Click “Start” and Select “Run”.

Ø Type the following: D:\Driver\Touchpad\Setup.exe (If D is not your DVD-ROM drive, substitute

D with the correct drive letter).

Ø Click on “Setup” to begin the Installation Wizard.

Ø Follow the Wizard’ s on-screen instructions to complete the installation.

Ø Restart the system.

Manual Installation

To install the driver manually, follow the step-by-step procedures described on each individual

section for a more clear installation.

Installing the CardBus Driver

Ø From Start, click on the "My Computer" icon and click the "View System Information".

Ø Click on the "Hardware" tab from the "System Properties" dialog window.

Ø Click the "Device Manager" button.

Ø Click on the "PCMCIA adapters" , double click the "Generic CardBus Controller" and click on

the "Driver" tab.