User Manual

5
5
3
3
0
0
9
9
A
A
K
K
E
E
Y
Y
B
B
O
O
A
A
R
R
D
D
U
U
S
S
E
E
R
R
'
'
S
S
G
G
U
U
I
I
D
D
E
E
This keyboard is fully compatible with IBM PS/2.
Keyboard Cable Connector
PS/2 Compatible Cable
(6-pin Miniatures Din Connector)
Pin# Signal Name Voltage
1 Keyboard Clock +5VDC Signal
2 Ground 0
3 Keyboard Data +5VDC Signal
4 Reserved 0
5 +5VDC +5VDC
6 Reserved 0
The ACPI Power Management
Keys and Their Functions
System requirement:
¾ Microsoft® Windows® 98 , ME, 2000, XP operating system.
¾ The system supporting ACPI or APMII.
¾ ATX motherboard and ATX power supply.
The functions of the power management are specified and performed by Windows® 98 ,ME, 2000,
XP
operating system, no vendor-specified driver is needed to use them, but the Windows® 98 ,ME,
2000, XP
operating system is necessary. There could be one or two or three ACPI power
management keys on the keyboard, those functions are as follows.
Power off key: Power down the system.
Sleep key: Put the system to sleep.
Wake up key: Wake up or powers up the system.
Power key: (Single key with three functions above)
¾ Press this key and hold over four seconds to power down the system.
¾ Press this key and release it within four seconds to put the system to sleep.
¾ When the system is asleep or powered down, press this key and release it within four
seconds to wake up or power up the system.