User's Manual

5
3 Hardware Installation
3.1 Connecting and Battery Information
Step 1: Make sure your PC is switched off.
Step 2: Plug in the receiver’s PS/2 mouse connector into the mouse port of
your PC and the PS/2 keyboard connector into the keyboard port.
Step 3: Take the keyboard and make sure the batteries on the back are
installed correctly. (Follow the polarity signs in the battery
compartment.)
Step 4: Take the mouse and make sure the batteries on the back are
installed correctly. (Follow the polarity signs in the battery
compartment.)
Step 5: Turn on your PC, and this RF keyboard kit will be automatically
detectived by the system.
Remarks:
1. Both the keyboard and mouse use 2pcs standard UM-3 (AA) 1.5V
alkaline batteries.
2. Battery life is approximately 2-3 months, depending on the intensity of
usage.
3. Make sure the receiver is placed in a location relatively free of strong
electromagnetic or transmission sources in order to ensure optimal
reception of the keyboard and mouse signal.
Bottom View of Keyboard
Mouse
Connector
Keyboard
Connector
Bottom View of Mouse