5213RF Wireless Keyboard & Mouse Kit Manual Version 1.
封面內頁 FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
Table of Contents Important Information............................................................................................. 2 1 2 1 Battery Installation ....................................................................................... 2 Receiver cable positioning.......................................................................... 2 Introduction ...................................................................................................... 3 What's in this package ..............
Important Information 1 Battery Installation When battery power gets too low, the computer will display a battery low icon on the system tray or flash 10 seconds every minute on right upper screen as notification. 1.1 Open the battery compartment cover on the bottom of the keyboard and mouse. 1.2 Follow the indication inside to place in keyboard and mouse batteries. 1.3 Place the battery compartment cover back and proceed with ID setting of the devices.
1 Introduction Congratulations on your purchase of this wireless RF keyboard and mouse! This keyboard and mouse will finally free you of the constraints of your desktop by providing a wireless connection between your keyboard/mouse and your PC. Pass around the keyboard or mouse during meetings without having to bother about a cable blocking your way or write e-mails and surf the Internet from the comfort of your living room couch! This keyboard and mouse kit consists of a keyboard, a mouse and a receiver.
2 System Requirements Microsoft Windows 98, Windows ME, Windows 2000 or Windows XP operating system Microsoft Internet Explorer 5.0 or later version (for the Internet keys) CD-ROM drive (for CD and Video operation) Standard sound card (for CD and Video operation) Available PS/2 keyboard port and mouse port. Please refer to table below for the other system requirements for the features.
3 Hardware Installation 3.1 Connecting and Battery Information Step 1: Make sure your PC is switched off. Step 2: Plug in the receiver’s PS/2 mouse connector into the mouse port of your PC and the PS/2 keyboard connector into the keyboard port. Mouse Connector Keyboard Connector Step 3: Take the keyboard and make sure the batteries on the back are installed correctly. (Follow the polarity signs in the battery compartment.
3.2 ID Setting This wireless keyboard kits contains 255 sets ID. This extra ID-recognition function helps to protect against interference from other RF keyboards in the same environment. The word CONNECT labels the ID button on each unit. The LED under ID button of receiver shows connecting condition. Step 1: Firstly, press the ID button on the top of the receiver once.
3.3 Battery Low & LED Indication Keyboard Battery Low Indication When the keyboard battery is low, the Green LED light under the ID button of receiver will flash steadily. Please change batteries when the Green LED light flashes steadily. After you change the batteries, the Green LED will steady lit.
4 Using the Keyboard Besides the usual keys, this keyboard also has extra-dedicated keys, which provide multimedia and Internet functionality: Hot Key Functions There is a row of hot keys on the top of keyboard. The functions are described as below: To open the default program you use for mail. E-Mail Note: You can select “Tools → Internet Options → Programs → Email” to change the default settings of E-mail system. To start your Microsoft Internet Explorer 5.
封底內頁 5 Troubleshooting If you are experiencing problems with your keyboard or mouse please check the following: 1. Make sure the USB connector is inserted into your PC USB port. 2. Check to see if the batteries in the keyboard and mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs in the battery compartment. 3. Replace the batteries on time to make sure the batteries are not low in power.
封底 3100505360 Version 1.0 Feb.
