User Manual

3
3 Hardware Installation
Step 1: Make sure your PC is switched off.
Step 2: Connect the receiver to your PC by plugging in the receiver’s green
connector into the mouse port of your PC and the purple connector into
the keyboard.
Step 3: Take the keyboard and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
ID Button
1.5V 2pcs
Step 4: Take the mouse and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
ID Button
Remarks:
1. The keyboard uses 2pcs. standard UM-3 (AA) 1.5V batteries, and the mouse
uses 2pcs. UM-4 (AAA) 1.5V batteries.
2. Battery life is approximately 3-4 months, depending on the intensity of usage.
Mouse Connector Keyboard Connector
Bottom View of Keyboard
Bottom View of Mouse