Datasheet

www.Beha-Amprobe.com
©2015 Beha-Amprobe
®
13104--engBeha-Amprobe
®
| In den Engematten 14 | 79286 Glottertal, Germany | Tel: [phone] | [e-mail] | www.Beha-Amprobe.com
The Beha-Amprobe 2100-Alpha, 2100-Beta and 2100-Gamma
are rugged and reliable two pole voltage testers for voltage and
continuity checks. Built tough for use in industrial and commercial
environments, the 2100 Series is safety rated up to CAT III 1000 V
/ CAT IV 600 V and measures voltage range up to 1000 V AC and
1200 V DC (2100-Gamma only). Designed with reinforced components
for dependable performance, the 2100 Series has an ingress protection
degree of IP 64 and is built according to voltage tester standard EN
61243-3:2010 and is GS approved.
2100 Series Two Pole
Voltage Testers
2100-Alpha | 2100-Beta | 2100-Gamma
2100 Series Features
• Automatic AC/DC voltage detection
with polarity indication
• Voltage test up to 1000 V AC /
1200 V DC (2100-Gamma)
• Switchable load and 10 mA or 30 mA
RCD trip test with two push buttons
• Automatic continuity test with visual
(LED)
• Single pole test to check phase polarity
• Two pole phase rotation indication
• Robust, double insulated cable with
wear indication shows when the test leads
are excessively worn or damaged and need
replacement
• Torch light / measurement area
illumination for working in poorly lit areas
• Audible indication when detected
voltages above 50 V AC and 120 V DC
• Single-phase voltage detection using
main probe - audible and visual signal when
voltage detected
• Auto power ON/OFF and OFF button
• Non-contact voltage indication/
electric eld (NCV/EF) - Non-contact
voltage detection function 100-1000 V
(2100-Gamma).
• Resistance measurement - Measures
and displays resistance up to 1999 ohms
(2100-Gamma).
• IP 64 splash and dust proof
• GS approved, built according to IEC
61243-3:2009, EN 61243-3:2010, DIN VDE
0682-401:2011
• Safety rated CAT IV 600 V / CAT III 690
(CAT III 1000 V 2100-Gamma)
2100-Alpha 2100-Beta
600 V690 V
DUAL RATED
600 V690 V
DUAL RATED
www.Beha-Amprobe.com
Push buttons for
switchable load
and RCD trip test
LCD screen
NCV/EF detection
area
LED Panel for:
· Phase rotation indication
· continuity test
· Single-pole phase test
· polarity
· voltage indicator
Torch light
2100-Gamma
4mm test probe
extension (screwable)
GS38 protective
probe caps
Test probe
protector cover
with accessory
probe and cap
storage