Datasheet

www.amprobe.eu
Amprobe® Test Tools
Data Sheet
©2008 Amprobe Test Tools. All rights reserved.
7/2008 3358131 Rev A
Amprobe® Test Tools Europe
Amprobe Test Tools Europe
Beha-Amprobe GmbH
In den Engematten 14
79286 Glottertal, Germany
Tel.: [phone] - 0
Amprobe® Test Tools
website: www.Amprobe.com
email: [e-mail]
Everett, WA 98203
Tel: 877-AMPROBE
LAN-1 Lan Cable Tester
Specifications
General Specifications
Display 18 LEDs: 9 Red and 9 Green, 9 LEDs on Remote module
Battery Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC 6F22
Battery life Approx 20 hours. (Alkaline battery)
Low Battery Indicator The LED indicator will not turn ON when BATT button is pushed
Operating environment 0 to 40°C (32 to 104°F), 10 to 70% RH
Storage temperature -10 to 60°C (14 to 140°F), 10 to 90% RH
Altitude 2000m, indoor operation
Dimensions 130 x 56 x 38 mm (5.1 x 2.2 x 1.5 in.)
Weight 1.26 kg (0.6 lb)
Cable Continuity
Maximum line length > 300 meters
Connector types RJ45, BNC
Agency Approvals & Certifications
CE - EMC Conforms to EN61326-1. This product complies with requirements of the following European Commu-
nity Directives: 89/336/EEC (Electromagnetic Compatibility) and 73/23/EEC (Low Voltage) as amended
by 93/68/EEC (CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity
of the equipment may disturb the measurement circuit. Measuring instruments will also respond to
unwanted signals that may be present within the measurement circuit. Users should exercise care and
take appropriate precautions to avoid misleading results when making measurements in the presence
of electronic interference.
Pub_ID: 11502-eng-01-A