User Manual

Operating manual for the GT-400 appliance tester
BEHA-AMPROBE
9.2.1. Measuring the insulation resistance
The same statements apply as in point 9.1.2.
9.2.2. Measuring the substitute leakage current
The same statements apply as in point 9.1.3.
When the „START“ button is pressed for 2 seconds, the
following selection menu appears in the display:
When the selection of „SKII with PE“ is confirmed
(„START“ button > 2s), the device is configured to the above
measurement.
The „Help function“ is accessed when it is confirmed.
Please note that after the measurement has ended, the
device switches back into the normal measuring sequence
for SKII devices without protective conductor connection.
25