Data Sheet

©2021 Beha-Amprobe
®
210701-en
For detailed specifications and ordering go to beha-amprobe.com
Beha-Amprobe
®
Division of Fluke Corp. (USA)
c/o Fluke Europe BV
In den Engematten 14
79286 Glottertal, Germany
Tel. [phone] - 8009-0
[e-mail]
beha-amprobe.de
52 Hurricane Way
NR6 6 JB United Kingdom
[e-mail]
beha-amprobe.com
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
Tel. [phone]
beha-amprobe.com
beha-amprobe.com
2100-GAMMA PRO
Safe and reliable voltage measurements
in hard-to-reach places
Safety requirements for electrical switchboards are getting more rigorous and electrical parts are increasingly protected by covers to
ensure they won’t be accidently touched. As electrical contact points become more covered, it is becoming harder to ensure reliable
contact for testing without having to remove protective covers. Test probes on average voltage testers are generally too short for
these enhanced isolators, making it difficult to assess voltage presence. Especially for proving the absence of voltage reliable contact
is fundamental.
To allow you to do your job safely and easily, Beha-Amprobe has developed new test probe extenders.
These test probe extenders are especially designed to allow measurement at fuse switch disconnectors and busbars inside
switchboards with isolators and isolation switches. The extenders ensure reliable contact without compromising safety.
Features
• Safe and reliable voltage measurements in tight
spaces and on hard-to-access parts
• Especially designed to allow measurement at
fuse switch disconnectors and busbars inside
switchgears with isolators and isolation switches
• Safe up to CAT IV 1000 V AC/DC / CAT III
1500 V DC
• Fits on the Beha-Amprobe 2100 Voltage Testers
Series and the FLUKE T90 / 110 / 130 / 150
• With thread (M3) for fast connection and reliable
contact
Safety Certification
All Beha-Amprobe tools, including the Beha-Amprobe
2100-Gamma Pro, are rigorously tested for safety,
accuracy, reliability, and ruggedness in our state-of-the-art
test lab. In addition, Beha-Amprobe products that measure
electricity are listed by a 3rd party safety lab, either UL or
CSA. This system assures that Beha-Amprobe products
meet or exceed safety regulations and will perform in a
tough, professional environment for many years to come.
2100-GAMMA PRO Contents
2100-GAMMA PRO
2100-Gamma voltage tester
1
2100-ACCS PROBE test probe extender
2
GS 38 protective probe caps
2
4 mm Ø test probe extension (screwable)
2
1.5 V alkaline batteries (installed)
2
User Manual 2100 Gamma voltage tester
1
User Manual 2100-ACCS PROBE
1
CC-2100 holster
1
Features for 2100-GAMMA PRO
2100-GAMMA PRO
Safety rating (measurement category)
CAT III 1000 V / CAT IV 600 V
Voltage test
•
Voltage indication–LCD
6...1000 V AC
(16 2/3...1000 Hz),
6...1200 V DC
Voltage indication–LED
+12 / -12 / 24 / 50 / 120 / 230
/400 / ≥690 V
Full range polarity detection
•
Single pole phase test
•
Continuity test (Rx) (visual and audible indication)
< 500 kΩ
Two pole phase rotation indication
Right / Left
Resistance measurement
0...1999 Ω
Non-contact cable break detector / EF (electric field)
•
Low resistance indication (L Rx)
Sound < 10 Ω
Data Hold function
•
IP64 splash and dust proof
•
Backlight
•
Flashlight/Measurement area illumination
•
Reinforced insulated cable
•
4 mm Test Probe Extensions (screwable) and
protective probe caps GS38
•
Holster
•
Features for 2100-ACCS-PROBE
2100-ACCS-PROBE
Nominal voltage / Safety rating
CAT IV 1000 V AC/DC / CAT III
1500 V DC
Distance from tip to fingerguard (probe length)
102 mm
Safety regulations
IEC 61010-031
Designed for
2100 Alpha/Beta/Gamma and Fluke
T90/T110, T130 and T150