Data Sheet

beha-amprobe.com
©2018 Beha-Amprobe
®
6011300A-ENG
Beha-Amprobe
®
Division of Fluke Corp. (USA)
c/o Fluke Europe BV
In den Engematten 14
79286 Glottertal, Germany
Tel. [phone] - 8009-0
[e-mail]
beha-amprobe.de
52 Hurricane Way
NR6 6 JB United Kingdom
e-mail: [e-mail]
beha-amprobe.com
Science Park Eindhoven
5110 NL-5692 EC Son
The Netherlands
Tel. [phone]
beha-amprobe.com
ALC-110-EUR
Leakage Current Clamp
Designed according IEC/EN61557-13, VDE 0413-13
The ALC-110-EUR true-rms leakage current clamp meter helps users detect,
document and compare leakage current readings over time as a means of
preventing unplanned downtime, and identifying intermittent RCD/RCCB
trips, all without downtime or switching equipment off.
The ALC-110-EUR is designed for industrial applications for leakage
current testing in installations as well as for appliance testing.
Safety Certification
All Beha-Amprobe tools, including the Beha-Amprobe ALC-110-EUR,
are rigorously tested for safety, accuracy, reliability, and ruggedness in
our state-of-the-art test lab. In addition, Beha-Amprobe products that measure
electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures
that Beha-Amprobe products meet or exceed safety regulations and will perform
in a tough, professional environment for many years to come.
6
Electrical
Safety
Features
• Following the standard for leakage current
clamps IEC/EN 61557-13
• Low influence of external low frequency
magnetic fields: ≤ 30 A/m, operating class 2
@ I
N: 3.500 mA – 600.0 mA
• True-rms measurements for accuracy when
measuring complex, non-sinusoidal waveforms
• Mechanical lock of the jaw;
jaw opening 30 mm (1.2 in)
• Highest resolution of 0.001 mA,
measure up to 60 A
• Selectable filter function
removes unwanted noise
• Selectable filters:
- Low Pass Filter Function for appliance
measuring (acc. IEC/EN 61557-16
amendment A)
- 50/60 Hz filter
- no filter
• Broad frequency range 15 Hz to 1 kHz which
makes this clamp ideal for a wide range of
applications including industrial and railway
application
• Selectable limits:
0.25 mA, 0.5 mA, 3.5 mA, 10 mA, 12 mA
• Max readings and hold function
• High safety rating: CAT III 600 V
• Auto power-off to save battery life
• Backlight display; auto backlight off and auto
power off for extended battery life
ALC-110-EUR
Leakage Current Clamp
Robust, strong
rubber housing for
easy grip
Large digital
display with bar
graph and filter
function
Push button to
unlock the jaw
Finger guard for
safe usage
Mechanical lock;
tight clamp for
higher accuracy,
avoiding disturbance
from measured wires
and magnetic fields
Applications
• Measurement of earth leakage current
• Measurement of differential leakage currents
• Measurement of leakage current through
the earth (PE) conductor
• Tracing the source of earth leakage current
• Measurement of current consumption
of appliances in service or customer service
sector without interruption to the circuit