Data Sheet

beha-amprobe.com
Beha-Amprobe
®
Division of Fluke Corp. (USA)
c/o Fluke Europe BV
In den Engematten 14
79286 Glottertal, Germany
Tel. [phone] - 8009-0
[e-mail]
beha-amprobe.de
52 Huricanne Way
NR6 6 JB United Kingdom
e-mail: [e-mail]
beha-amprobe.com
Science Park Eindhoven
5110 NL-5692 EC Son
The Netherlands
Tel. [phone]
beha-amprobe.com
©2018 Beha-Amprobe
®
6010181A-ENG
The Telaris
®
ProInstall series are rugged, light weight tools
that verify the integrity of electrical installations in residential,
commercial, and industrial environments.
The Series features an easy-to-use, intuitive interface and a
large backlight LC-display that allows for easy viewing across a
wide range of angles, allowing electrical contractors to work
efciently right away, with a rotary dial knob that clearly
indicates which function has been selected. The easy to read,
large backlight LC-display allows for easy viewing across a wide
range of angles.
The ProInstall-200-D adds measurement of earth ground
resistance (with rod attachment), and Type B (DC sensitive)
RCDs. It also features automatic RCD test sequencing to speed
testing and a 3-level internal memory storage that can collect
more than 1000 values. The ProInstall-200-D is a complete
tester for advanced users
Telaris ProInstall-100-D,
and ProInstall-200-D
Multifunction Electrical Installation Tester Series
Testers Verify the Safety of Electrical Installations Quickly and Accurately
• Lightweight and compact for
portability
• Simple, intuitive interface
• Auto-sequence measurements
allow more efcient testing
(ProInstall-200-D only)
• Fast, high current loop test
• No trip loop test: does not trip RCDs
• Easy to read, large backlight
LC-display
• Data logging capabilities with PC
software
• Tests DC sensitive RCDs (type B)
(ProInstall-200-D only)
• Tests electrical installations per
regulatory standards: DIN VDE
0100-600, ÖVE/ÖNORM E 8001, HD
60364-6, IEC 60364-6
• Safety rated to: CAT III 500V, CAT IV
300V
• Insulation resistance
measurements up to 1000V DC
• Low Ohm resistance
• Loop impedance
• Earth ground resistance
(ProInstall-200-D only)
• Test DC sensitive RCDs: Type
A (both models) and Type B
(ProInstall-200-D only)
• Phase sequence
Telaris Proinstall Series Features
Large backlight
LC-display
Rotary switch
• Low Ohm resistance
• Insulation resistance
• Loop impedance - High
current trip mode and
No trip mode
• RCD trip time and level
• Volts
• Phase rotation
• Earth resistance
Telaris ProInstall-200-D
Multifunction Installation Tester
w/type-B RCD & Earth Test
5
Electrical Safety
DUAL RATED