Operation Manual

25
6. UTILISATION
Use the buttons to the whole process of setting
To move from one category to another, press the button ( ) to get down and the button (mic) to get up.
To confirm your choice, press the button
(REC) and the button (›IM) to exit.
4. Audio
You can choose to enable or disable the sound on your videos.
By default, the sound is enabled.
5. Time span
This mode allows you to choose the length of the sequences of files you save. For example, if you shoot
1 hour continuous, one separates the DASHCAM film several sequences of 2 minutes
By default, sequences are recorded 2 minutes.
6. G-Sensor
This mode allows you to adjust the sensitivity of your DASHCAM 1 and thus adapt the quality of the image.
The default sensitivity setting is on Middle (middle).
7. Autosave
Lorque DASHCAM1 you turn, it automatically saves on the micro SD card.
Once it has reached its maximum capacity, the old files are overwritten (except locked)
By default, the DASHCAM 1 automatically register upon startup.