Operation Manual

6. UTILISATION

Discovery Menu

To set your DASHCAM 1, connect it to a monitor or TV through RCA audio-video cable.

Turn the DASHCAM 1 and press (

›IM) to enter STANDBY mode. There are two pages, to move from one to the other, press

again the button (

›IM).

Use the buttons to the whole process of setting

To move from one category to another, press the button ( ) to get down and the button (mic) to get up.

To confirm your choice, press the button

(REC) and the button (›IM) to exit.

FIRST PAGE OF THE MENU

1. Image Size

You can adjust the image size between HD (1280 * 720) & Vac (640 * 390).

By default, this is the HD format is selected.

2. Time stamp

This mode allows you to date and give the length of your registration.

By default, the mode is enabled.

3. Detect motion (motion sensor)

This mode allows you to start recording your DASHCAM 1 when it detects movement

By default, this mode is disabled.

First page of the