Operation Manual

4. BUTTONS FUNCTIONS

2 (REC)

Recording Press (REC) to put on the record or stop.

Validation When you are connected to a screen in one of the following modes:

STAND BY •CAMERA • LECTURE, press (REC) to validate the choice of the function

3 (

›IM)

Lecture - Stop When DASHCAM 1 is connected to a screen, press 3 sec. the button (

›IM) for reading the recorded movie,

selection of the film is achieved by pressing the button (REC).

To exit the playback mode, press 3 sec. button (

›IM)

Menu When DASHCAM 1 is connected to a monitor and the STANDBY mode, press (›IM) to access the

installation menu.

4 (

mic)

Mute Default DASHCAM 1 records with sound. If you want to disable this feature when recording press the button

(mic).

Once mode "mute" on, the button

(REC) flashes in red

To return to the recording mode with sound, press the button (mic)

Menu When DASHCAM 1 is connected to a monitor and the STANDBY mode, press (mic) to go up in the setup

menu.

5 (

)

Verrouillage In recording mode, you can lock a sequence so that it is not overwritten when the memory card is full.

This feature can be very useful for a particular accident, pressing the button (

) for 3 seconds, the lock

function will record the previous 10 seconds and the next 20 seconds.

Menu When DASHCAM 1 is connected to a monitor and the STANDBY mode, press ( ) to go down in the setup