Operation Manual

21
1 On-Off
Lighting
2 Recording
Validation
3 Playback - Stop
Menu
4 Mute
Top (menu)
5 Locking
Bottom(menu)
6 Reset
1
2
3
4
5
6
Lighting
by LEDs
white
4. BUTTONS FUNCTION
1 ( )
On-Off On = Switching. Press 3 sec. the button ( ) for activating the system. Long beep, button (
›IM) light up.
A short beep sounds, the button (REC) flashing, the system immediately records on the memory card.
Off = Shutdown. Press 3 sec. the button ( ) to turn off the system. The videos recorded during the period of
activation are stored on the micro SD (TF) card.
Lighting This function allows you to adjust the lighting of white LEDs shooting depending on the ambient lighting. A
brief press (. <1 sec) this button allows you to choose between three modes of activation of white LEDs:
•LIGHTING LED STANDING NIGHT FILM) : Press the button ( ) (each time one beep) until the white LEDs
are lit permanently. In this case, the LEDs light up permanently for a movie night, the battery life will be
greatly reduced.
•LEDs OFF PERMANENT : Press once again the button ( ) a beep, white LEDs are extinguished permanently.
This mode provides better battery life.
•LED LIGHTING BY AUTOMATIC BRIGHTNESS : Press the button again ( ) , a beep, white LEDs will light
automatically when the light is too low.