Instruction Manual

SAFETY & TRIGGER

The automatic safety is now engaged. The safety is located

on the receiver (Fig. 3). To prepare to re, move the safety

toward the FIRE position (Fig. 4).

There’s a large adjustment screw located behind the trigger

blade (Fig. 5). This screw is accessible through the hole

on the bottom of the trigger guard. Turning it clockwise

increases trigger-pull; counterclockwise decreases the

trigger-pull. Improper adjustments may make the airgun

unsafe.

FIG. 3

FIG. 4

WARNING:

BE SURE THE AIRGUN IS ALWAYS POINTED IN A SAFE

DIRECTION. NEVER POINT THE AIRGUN AT ANYONE

EVEN IF IT IS UNLOADED. ALWAYS ASSUME AND HANDLE THE AIRGUN AS IF IT WERE

LOADED AND READY TO FIRE.

TAKE CARE WHEN

ADJUSTING THE PULL

WEIGHT. IF ADJUSTED TOO LIGHT, THE GUN MAY

NOT COCK OR IT COULD FIRE UPON CLOSING

THE COCKING MECHANISM.

CAUTION

FIG. 5

BE SURE OF YOUR

TARGET AND KNOW

WHAT’S BEHIND OR NEAR YOUR TARGET. IF A

PROJECTILE REBOUNDS OR RICOCHETS, STOP

SHOOTING IMMEDIATELY AND CHANGE YOUR

BACKSTOP. ALWAYS WEAR PROTECTIVE EYE-

WEAR. KEEP YOUR FINGER OFF THE TRIGGER

UNTIL THE GUN IS POINTED IN A SAFE DIRECTION

AND YOU’RE READY TO SHOOT.

CAUTION