Instruction Manual

COCKING & LOADING

Point the air rie in a safe direction. Grasp the stock behind

the trigger guard (ngers OFF the trigger!). Position your other

hand on the barrel just behind the front sight. Break the barrel

by smoothly rotating it downward until the cocking action is

completed. Do not use excessive force or speed. (Fig. 1)

Insert a single pellet (nose/head rst) into the breech

(Fig. 2) until the skirt is ush with the breech.

Close your air rie by pivoting the barrel upward until it locks

back into position. This should be done with enough force to

lock the barrel but not so violently that it damages the airgun.

FIG. 1

FIG. 2

TO PREVENT THE BARREL

FROM CLOSING SUDDENLY,

ALWAYS RESTRAIN THE BARREL DURING THE

LOADING PROCESS. DO NOT MOVE THE SAFETY TO

THE FIRE POSITION DURING LOADING. FINGERS

SHOULD BE OUTSIDE THE TRIGGER GUARD UNTIL

THE BARREL IS RETURNED TO THE LOCKED POSITION,

YOU ARE ON TARGET AND YOU ARE READY TO TAKE

YOUR SHOT.

CAUTION

WARNING:

DO NOT INHALE DUST FROM LEAD PROJECTILES OR

PUT THEM IN YOUR MOUTH. WASH HANDS AFTER

HANDLING LEAD. SOME PELLETS MAY CONTAIN LEAD, A CHEMICLE KNOWN TO THE

STATE OF CALIFORNIA, TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER

REPRODUCTIVE HARM).