Specifications

Air Rie Owner’s Manual
OPERATION
LOADING AREA
Installing scope to the receiver grooves is recommended for shooters preferring a higher quality
sighting system. In most cases, removal of sights (front and rear) is recommended for unobstructed
mounting and view through optics.
Modication of the gun’s mechanism may cause a gun to malfunction. Tampering with a gun
may make it unsafe to use. Any change in the performance such as lowered trigger force and
shorter trigger travel indicates possible wear.
WARNING: Adjustment to the trigger assembly could allow this airgun to re if
dropped or jarred, with or without the safety engaged.
WARNING: THE TRIGGER ON THIS GUN IS CAPABLE OF BEING SET BELOW
TWO LBS (8.9N). ACCIDENTAL DISCHARGE CAN OCCUR IF THE RIFLE IS DROPPED.
To re this air rie with pellets, rst put the safety to
the on position. The safety lever is on the right side of
rie and safety indicator is on the left side. S safety on,
F ready to re. The arrow is pointing to the S pull the
bolt up and back all the way until you hear the click of
the trigger engaging. Insert a pellet nose rst in breech.
Chamber pellet by pushing the bolt knob forward and
down to lock breech, disengage safety and re safety.
Bolt Action Operation: Avoid getting pinched
in breech when closing bolt. It is recommended
to load projectiles with your trigger nger, as
well as, closing the breech with same hand,
this will assure that the gun won’t be triggered
o prematurely.
Lever Action Operation: Models that have
the lever instead of the bolt, rst press the
release button on the lever, then pull back
to load pellet then forward to complete the
cocking cycle.
LOADING AREA
RELEASE BUTTON
F
S
SAFETY
Air Rie Terminology
BARREL
TRIGGER GUARD
Bolt
TRIGGER
FILLER CAP
SAFETY
Specications
CATALOG NO. CALIBER WEIGHT (lbs.) OVERALL LENGTH VELOCITY (ft./sec)
Power Series .177 & .22 6.4 lbs. 39.75” 1,000 fps in .177 Cal.
1317 / 1322 830 fps in .22 Cal.