Instruction Manual

SIGHT ADJUSTMENT

Your Beeman air pistol may come with open sights. The P1,

P3, P11 have either a grooved receiver or a scope rail.

A screwdriver may be required to adjust open sights. Avoid

contact with the rear sight when opening and closing the air

pistol.

To adjust windage: Turn the screw on the right side of

the sight. Rotating the screw clockwise moves the point of

impact to the left. Counterclockwise will go in the opposite

direction (Fig. 6).

To adjust elevation: Turn the screw on the top of the sight

clockwise to lower the point of impact. Counterclockwise

will raise the unit (Fig. 7).

FIG. 6

FIG. 7

TAKE CARE WHEN ADJUSTING THE PULL WEIGHT. IF

ADJUSTED TOO LIGHT, THE GUN MAY NOT COCK OR IT

COULD FIRE UPON CLOSING THE COCKING MECHANISM.

CAUTION

TRIGGER ADJUSTMENT

P1 and P11: To adjust trigger-pull weight, insert 2mm

Allen wrench through access hole in the grip heel until

it engages the adjustment screw inside the pistol grip.

Turning clockwise increases trigger-pull pressure; turning

counterclockwise decreases trigger-pull pressure (Fig. 8).

Improper adjustment can make the trigger unsafe!

P3: The trigger is not adjustable.

FIG. 8