Operation Manual

18
Vital-FiXX 3 in 1 EN
BEEM - Elements of Lifestyle
Appliance description
Appliance elements
(See illustration on the left fold-out page)
Pusher1
Feed 2
Lid 3
Filter/grater attachment4
Pouring lip5
Collecting bowl6
Pulp container7
Drive unit8
Speed controller9
Locking arm10
Juice jug11
Lid, juice jug12
Separator, juice jug13
Juice spout14
Brush15
User manual (not illustrated)16
Speed controller
Level Function
Appliance switched off.
Continuous operation
Operation and use
Prior to use
Position the collecting bowl on the 
drive unit so that the juice spout slides
into the corresponding recess in the
drive unit. (image A)
Position the lter and lter/grater at- 
tachment on the carrier of the drive
unit so that the tongue on the under-
side of the lter/grater attachment
slides into the corresponding grooves
in the carrier.
Push in the lter/grater attachment 
until it snaps in.
Tilt the pulp container slightly forwards 
and push the lower end under the
pouring lip (image C).
Then press the lower end of the pulp 
container against the drive unit.
Position the lid on the collecting bowl 
so that the pulp container is covered.
Insert the pusher into the feed shaft. 
Raise the locking arm until it snaps in 
on both sides (image D).
Place the juice jug under the juice 
spout.
Make sure that the speed controller is 
at the position.
Insert the plug into the mains socket. 