Operation Manual
24
Tea Joy Express EN
BEEM - Elements of Lifestyle
To descale the kettle (3) proceed as fol-
lows:
Fill the kettle (3) up to the MAX mark
with a mixture of fresh water and des-
caling solution.
NOTE
Refer to the instructions of the ►
manufacturer for the dosage and
contact time.
Empty the kettle (3), rinse with clear
water and wipe the inside with a damp
cloth.
Fill the kettle (3) with fresh water up to
the MAX mark, allow the water to boil
and pour it out.
Repeat the process.
Storage
If you do not intend to use the appli-
ance for a longer period of time, empty
and clean it as described in the section
Cleaning and care. Store the appliance
and all accessory parts in a dry, clean and
frost-free place which is protected against
direct sunlight.
Tea strainer
Clean the tea strainer (5) with a soft ■
brush and warm water after each use.
NOTE
The tea strainer can ► not be cleaned
in the dishwasher.
Care of stainless steel parts
We recommend using INOX-METAL-PO-
LISH from Beem for regular maintenance
and the removal of difcult stains from
stainless steel surfaces. The polish resto-
res appliances to their original shine. IN-
OX-METAL-POLISH is available in tubes
and is suitable for pots as well as for other
objects made of stainless steel, chromium,
brass, copper, aluminium, silver and also
hard plastics. INOX-METAL-POLISH is
used in factories for polishing stainless
steel. You can obtain INOX-METAL-PO-
LISH from your retailer or by phoning us or
visiting our website at www.beem.de .
Descaling
In order not to decrease the service life of
the kettle (3), it must be descaled at regu-
lar intervals.
The descaling intervals depend on the
water hardness and the frequency of use.
Calcium deposits can be recognized by
the staining on the inside of the kettle (3).
NOTE
If the kettle (3) is strongly scaled, the ►
dry run protection is triggered and
the appliance is switched off.