Operation Manual

20
Tea Joy Express EN
BEEM - Elements of Lifestyle
Appliance description
(refer to the left outlet ap for illustration)
Cordless socket with cable compart-1
ment
Temperature selection switch2
Kettle3
Teapot4
Tea strainer5
Lid, teapot6
Lid opener7
Teapot handle8
Kettle handle9
Level indicator with MIN-/MAX mark10
Power indicator light11
Heating indicator light12
Kettle lid (not illustrated)13
Operating instructions (not illustrated)14
Operating elements
Symbol Meaning
Red power indicator light (11):
appliance is ready for opera-
tion
Yellow indicator light
Heating (12):
Appliance is heating
O
No heating / standby
●
Warm
water
Temperature
approx. 35 °C -
45 °C
●●
Hot water
Temperature
approx. 75 °C -
85 °C
●●●
Boiling
water
Temperature
approx. 95 °C -
100 °C
Continuous
boiling
Temperature
approx. 100 °C
Before using for the rst time
Clean the appliance as described in ■
the section Cleaning and care.
Fill the kettle (3) with fresh water up to ■
the MAX mark and allow the water to
boil in order to remove possible produc-
tion residues.
Place the lid (13) onto the kettle (3). –
Place the kettle (3) onto the cordless –
socket (1).
Insert the plug into the mains socket. –
Turn the temperature selection –
switch (2) clockwise to the "
"
heating function to boil the water.
Wait until the water boils and then –
turn the temperature selection switch
(2) to the "O" position .
Pour out the water. –
NOTE
During the initial period of use, odour ►
may be produced by the materials
used in the appliance. The odour will
diminish after a short period of time.
Repeat the process. ■
Clean the appliance as described in ■
the section Cleaning and care.