Operation Manual

23
EN Power Station Pro4
BEEM - Elements of Lifestyle
Steam lock
If you wish to use the steam ironing func-
tion continually, you can lock the steam
button.
To lock the steam button (5), press it 
and push the locking button (6) back-
wards.
If you no longer wish to steam iron, 
push the locking button (6) forwards.
Automatic switch-off
The appliance switches itself off automati-
cally after approx. 20 minutes if the steam
ironing function is not used during this
time.
Reselect the ironing temperature. 
To do this, press the temperature
selection button (4) repeatedly until
the desired temperature level starts
ashing in the display. As soon as the
appliance has heated up to the selec-
ted temperature, the appliance emits
an acoustic signal and the selected
temperature lights up constantly.
NOTE
The automatic switch-off only func- ►
tions when the steam iron function is
not locked (see section Steam lock).
To reactivate the automatic switch-
off, release the steam lock.
After using
Switching off the appliance
Press the temperature selection but- 
ton (4) repeatedly until only displays
(8) and (18) are lighted.
Pull the plug out of the mains socket. 
Empty the water tank (see section 
Emptying the water tank).
Transporting the appliance
For transporting, pull up the swivelling 
carrying handle on the base station
until it locks (see gure B1).
After you have set aside the appli- 
ance, simultaneously press both unlo-
cking buttons (15) and fold the carry-
ing handle down (see gure B2).
Empty the water tank.
Switch off the appliance. 
Press the button upwards to release 
the lock on the water tank and pull the
tank to the front and out of the appli-
ance (see gure A1).
Remove the calcium lter by pulling it 
upwards out of the water lling ope-
ning (see gure A2).
Tip the rest of the water out of the 
tank (see gure A4).
Insert the calcium lter back into the 
water tank (see gure C3).
Push the water tank back into the 
appliance until it audibly locks in (see
gure A5).