Operation Manual

EN Pizza-FiXX
BEEM – Elements of Lifestyle 21
Operation and controls
WARNING
Risk of burns due to hot surfaces
 Only grasp the appliance by the plas-
tic handle.
WARNING
Risk of scalding due to escaping water
vapour
 Avoid contact with the water vapour
which can escape from the centre of
the top of the appliance.
Proceed as follows:
1. Open the cover (2) of the oven.
2. Place the pizza pan (3) or the pizza
stone (4) into the appliance.
When using the pizza pan, make sure
that it runs correctly in the track.
When using the pizza stone, preheat it
for 10 minutes at 250° C using lower
heat ( ).
3. Place the food to be cooked onto the
pizza pan or pizza stone.
4. Close the cover.
5. Put the mains plug into the socket.
The mains indicator lamp (5)
illuminates.
6. Set the desired temperature. The
temperature indicator lamp (9) is illu-
minated when the appliance is heating
and goes out when the selected
temperature has been reached.
7. Set the cooking mode and the cooking
time.
8. Occasionally check the condition of
the food through the window in the
cover or by briefly opening the cover.
9. When the food has been cooked to
satisfaction, set all controls to (0). The
appliance is now shut off.
10. Unplug the mains plug from the sock-
et.
11. Open the cover.
12. Remove the food.
13. Allow the appliance to cool down with
the cover open.