Operation Manual

19
EN Multi-MiXX
BEEM - Elements of Lifestyle
Electrical connection
For safe and trouble-free operation of the
appliance, the following instructions on
the electrical connection must be be ob-
served:
Before connecting the appliance, ■
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. The
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
The mains socket must be protected ■
by at least a 10 A automatic circuit
breaker.
Ensure that the mains cable is undam- ■
aged and is not laid over hot surfaces
or sharp edges.
The connecting cable must not be ■
strained or bent.
Always unwind the mains cable com- ■
pletely before connecting the appliance
to the mains socket.
Do not allow the connecting cable to ■
hang over edges (trip wire effect).
The electrical safety of the appliance ■
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualied
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
Appliance description
(see illustration on the left fold-out)
Hand mixer1
Mains connecting cable2
Pedestal3
Handle4
Ejector button5
Turbo button6
Speed controller7
Lighting8
Stirring tool socket9
Scraper socket10
Stirring hook11
Kneading hook12
Scraper13
Hand spatula14
Mixer stand15
Hand mixer socket16
Hand mixer release17
"Tip" release18
Scales display19
Scales ON/OFF switch20
Tare button21
Base with integrated scales22
Mixing bowl with drive gear teeth23
Lid, mixing bowl24
Feeder opening25
Lid recess26
User manual (not illustrated)27