Operation Manual

23
EN Multi-FiXX 500
BEEM - Elements of Lifestyle
Mixing
(see images A1 - A6)
Place the sealing ring (14) around the 
base of the chopping unit (13). Make
sure that the sealing ring is lying at
all the way round.
Insert the blade unit (13) with the t- 
ted sealing ring (14) into the blender
jug (15) from below. The noses of the
base t into the recesses at the bot-
tom of the blender jug.
Turn the blade unit (13) with the lid 
lock (17) anticlockwise to tighten.
Place the blender jug (15) onto the 
motor unit (1) with the handle to the
right and turn the blender jug clock-
wise until it audibly snaps in.
NOTE
Make sure that the blender jug (15) ►
is seated properly, otherwise the ap-
pliance cannot be operated (safety
switch).
Put liquid/fruit into the blender (15). 
NOTE
Pour liquids into the blender rst and ►
then the solids.
Do not put solid parts (metal, wood, ►
bones) into the blender jug.
Cut through larger parts so that the ►
blade unit (13) can seize them.
Pay attention to the maximum lling ►
quantity in the blender jug (15).
Place the lid of the blender (16) onto 
the blender jug (15) and lock it by
turning it clockwise.
Place the lid lock (17) onto the lid of 
the blender (16) and lock it by turning
it clockwise until it snaps in.
NOTE
Pay attention to proper seating of the ►
lid (16) and the lid lock (17) to pre-
vent squirting out of the appliance.
Insert the plug into the mains socket 
and move the rotary switch (2) to im-
pulse or continuous operation.
CAUTION
Observe the maximum operating ►
time of 2 minutes.
Allow the appliance to cool down for ►
1 minute.
Relling:
Switch off the appliance. 
Remove the lid lock(17) and ll the 
blender (15).
Close the lid (16) again with the lid 
lock (17).
NOTE
Pay attention to the maximum lling ►
quantity in the blender jug (15).