Operation Manual

27
EN Multi-back Topclass 3 in 1
BEEM - Elements of Lifestyle
The mains cable must not pulled ■
tightly, bent or come into contact with
hot surfaces.
Route the cable to prevent risk of trip- ■
ping.
The electrical safety of the appliance ■
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualied
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
Appliance description
(See illustration on the left fold-out page)
Control panel and display1
Lid2
Window3
Ingredients dispenser4
Bread baking mould5
Kneading hook6
Cake baking mould7
Stirring hook8
Measuring spoon9
Measuring cup10
User manual (not illustrated)11
Control panel and display (1a/1b)
NOTE
Press the buttons described below ►
repeatedly to test all setting options.
An acoustic signal is emitted each
time the button is pressed. Pay
attention to the display; it changes
each time the button is pressed.
Each combination of programme, ►
browning level and weight is auto-
matically displayed with the corre-
sponding baking time.
■ : Use this button to select from
the eleven preset programmes. The
set programme appears in the display
under Menu (baking programme 1 -
11).
■ : Use this button to set the weight
of the nished bread. You can choose
between three different sizes: =
540g, = 680g or = 900g. The
set weight is underlined in the display.
■ : Use this button to select one of
three different browning levels for pro-
grammes 1 - 4: = light, = me-
dium, = dark. You can also shorten
the baking time in baking programmes
1, 2 or 3 The set browning level is
underlined in the display.
■ : Use this button to start the se-
lected programme. To stop the pro-
gramme, press and hold down this but-
ton for approximately two seconds.