Operation Manual

19
EN Miracle Mop 9 in 1
BEEM - Elements of Lifestyle
NOTE
A metal ball is situated in the water ►
tank that is used as a weight for the
suction hose. Make sure that this
metal ball is always covered with
water so that steam can ow evenly
(see image C3).
Hand-held steam cleaner
Inserting
Remove all attached nozzles and 
loosen the carrying strap.
Insert the lower end of the hand-held 
steam cleaner (11) into the main body
(13) and subsequently push the upper
end until it audibly snaps in.
Removing (see image D1)
Press the release lever (7) and remove 
the hand-held steam cleaner (11) from
the main body (13).
To simplify cleaning with the hand- 
held steam cleaner, you can x the
carrying strap (20) to the handle of the
hand-held steam cleaner and the ex-
tension hose (see image D2).
Attaching accessories
Attaching/removing the adapter
Remove the hand-held steam cleaner 
(11) from the main body (13).
Align the guide on the hand-held 
steam cleaner and the recess on the
adapter with each other.
Push the adapter into the hand-held 
steam cleaner until it snaps in (in the
same way as the extension hose as il-
lustrated in image F1).
To remove the adapter, press the re- 
lease lever on the bottom of the adapt-
er and pull the adapter from the hand-
held steam cleaner (see image F2).
Attaching
Insert the handle into the extension. 
Insert the xing screw into the hole in 
the handle and turn the screw tightly
with a suitable Phillips screwdriv er
(see image A1).
Attach the extension to the main body 
Insert the xing screw into the hole in 
the extension and turn the screw tight-
ly with a suitable Phillips screwdriv er
(see image A2).
Align the guide on the main body with 
the recess in the oor brush and push
the lower end of the main body into
the oor brush until it snaps in.
To remove the oor brush, press the 
release lever on the back of the oor
brush and pull the oor brush out of
the main body (see image B).
Preparations
Filling the water tank
Press both tank release buttons (12) 
und remove the water tank (see im-
age C1).
Turn the tank cover (5) 45° clockwise 
to open it.
Fill with a maximum of 400 ml of water. 
Close the water tank by turning the 
cap 45 ° clockwise (see image C2).
Push the water tank onto the appli- 
ance until it audibly snaps in.