Operation Manual

47
Operation and use
BEEM - Elements of Lifestyle
EN
Pick up the milk container (1) from the base plate (6) using 
the handle (2).
Pour the froth into a cup or use a spoon to remove it from the 
milk container.
NOTE
Before you begin frothing milk again, you must allow the de- ►
vice too cool down. The device cannot be switched on again
until it has cooled down sufciently.
Rinse the milk container (1) with cold water after each ►
frothing process to accelerate cooling down.
Switching off
NOTE
The device ► cannot be switched off via the ON switch (3).
The device switches itself off automatically only after frothing ►
or when the required milk temperature has been reached.
Pull the mains plug out of the mains socket if you acciden- ►
tally switch on the device and remove the milk container (1)
from the base plate (6).
Pull the plug out of the mains socket after the device has 
automatically switched itself off.