Operation Manual

42
Design and function
BEEM - Elements of Lifestyle
EN
Operating elements
ON switch
To switch on the device, proceed as follows:
Push the ON switch (3) briey so that the control light goes 
on.
NOTE
Do not press the ► ON switch (3) again after the device has
been switched on.
The device ► cannot be switched off via the ON switch (3); it
switches itself off automatically.
NOTE
If the ON switch (3) was already pressed before connec- ►
tion of the device, the device will be switched on when the
mains cable (7) is inserted into the mains socket.
The device switches itself off automatically only after frothing ►
or when the required milk temperature has been reached.
3