Operation Manual
38
Comfort de Luxe EN
BEEM - Elements of Lifestyle
Troubleshooting
The following table will help you locate and eliminate minor faults:
Fault Possible cause Remedy
The power indicator does
not light up after switch-
ing on.
Plug not inserted into
socket.
Insert plug.
Automatic circuit breaker in
electrical distribution board
tripped.
Switch on the automatic
circuit breaker again.
The automatic circuit
breaker in the electrical
distribution board trips.
Too many appliances con-
nected to the same power
circuit.
Reduce the number of appli-
ances on the power circuit.
No fault detected. Contact customer service.
Long heating-up time. The tank is scaled. Descale the tank.
No steam.
Appliance not switched on. Switch on the appliance.
Appliance is not yet ready
for operation.
Wait until the steam ready
indicator extinguishes.
The accessories are not
correctly attached.
Check the accessories.
Not enough water in the
tank.
Fill the tank, see section
Relling the tank (page 33)
.
Steam switch locked. Unlock the steam switch.
Steam ow set too low. Increase the steam ow.
Steam escapes constant-
ly from the tank cap.
Appliance is defective. Contact customer service.
NOTE
If you cannot resolve the problem with the steps described above, please contact ►
customer service.