Operation Manual
33
EN Comfort de Luxe
BEEM - Elements of Lifestyle
Operation and use
Switching on and using the
appliance
Insert the plug into the mains socket.
Switch on the appliance by press-
ing the on/off switch (4). The power
indicator (9) lights up red, the steam
ready indicator (5) lights up green and
the water in the tank is heated up.
When the operating temperature is
reached, the steam ready indicator (5)
extinguishes. The appliance is ready
for use.
If necessary, unlock the steam
switch (31) and set the steam quan-
tity.Press the steam switch. Direct the
steam jet at a cloth until the steam
ows out evenly.
Press down the steam switch and di-
rect the steam jet towards the surface
to be cleaned.
NOTE
The heater in the appliance switches ►
on and off frequently during use in
order to maintain the pressure in the
tank. The steam ready indicator lights
up green when the heater is switched
on.
Setting the steam ow
The steam ow is set with the steam ow
regulator (6).
Turn the steam ow regulator in a
clockwise direction to decrease the
steam ow.
Turning completely to the right: steam-
ing is switched off completely.
Turn the steam ow regulator in an
anti-clockwise direction to increase
the steam ow.
Locking/unlocking
the steam switch
Push the steam switch lock (30) to the
right to lock the steam switch.
Push the steam switch lock (30) to the
left to unlock the steam switch.
Relling with water
Switch off the appliance and pull the
plug out of the mains socket.
Press down the steam switch (31) un-
til steam is no longer discharged.
Lock the steam switch.
Fill the tank, see section Filling with
water (page 30).
Switch on the appliance again, see
section Switching on and using the
appliance (page 33).