Operation Manual

33
EN Café Joy V2
BEEM - Elements of Lifestyle
Inserting the permanent lter
Pull the lter holder (20) out of the ap- 
pliance.
Insert the permanent lter (18) into the 
lter holder (20) from above.
NOTE
When inserting the permanent lter ►
(18) make sure that it snaps into the
at part in the lter holder (20). Pay
attention to the marks (image A1).
Brewing coffee
Fill the water tank with water as de- 
scribed in the section Filling with
water (page 32).
Insert the permanent lter (18) into 
the lter holder (20) as described in
the section Inserting the permanent
lter (page 33).
Put the desired quantity of coffee 
powder into the lter.
Recommendation: one teaspoon (ap-
prox. 4-6 g) per cup.
Push the lter holder back into the ap- 
pliance until it stops.
Place the glass jug (21) with lid (22) 
onto the hotplate (17).
NOTE
Make sure that the glass jug (21) ►
is standing in the middle under the
lter holder (20).
Press the  button (32) to start brew-
ing coffee. The red indicator light
"Coffee machine" (25) lights up. The
brewing process begins.
Roughly 1 minute after brewing has 
completed, you can remove the glass
jug (21) and pour coffee.
After completing the brewing process, the
coffee is kept warm on the hot plate for
about two hours.
Cancelling the brewing process
Press the  button (32) to cancel the
brewing process. The red indicator
light "Coffee machine" (25) extin-
guishes.
Press the button again to restart brew- 
ing.
Switching off the coffee machine
Press the  button (32) to switch off
the coffee machine. The red indica-
tor light "Coffee machine" (25) extin-
guishes.
NOTE
The appliance switches itself off ►
automatically after 2 hours.