Installation manual

Service User Menu Setting Up the System
Apr 2004 33
6
6.3.5 Dflt. Setting
The Capsat F33 offers the possibility of changing the
system configuration to Factory Default Setting. Please note
the current configuration will be lost.
Use  or  to toggling between options.
• Select Service User from the main menu and press

.
• Type the Service User PIN code and press  to
enter the Service user menu.
• Select Dflt. Setting and press

.
• Select Factory Dflt. and press .
• Press

to confirm that you want to return to
Factory Default Setting.
6.3.6 Calibration
Normally the system is factory calibrated, but in some
situations like service or repair additional calibration might
be needed.
Use  or  to toggling between options.
• Select Service User from the main menu and press

.
• Type the Service User PIN code and press  to
enter the Service user menu.
• From the Service User menu select Calibration and
press .
• Select either IQ-calib, IQ-const or MO adjust
and press

.