Installation manual

Service User Menu Setting Up the System
Apr 2004 31
6
6.3.4 PIN Codes
Access to some of the terminal functionality is restricted by
PIN codes. Two kinds of PIN codes exist, Super User and
Service User PIN. For both PIN code types the length must
be between 4 and 8 digits long and contains digits between
0 and 9.
If the Super user/Service User PIN code is entered
incorrectly 5 times, the PIN becomes blocked.
A blocked Super User PIN can be unblocked with a PUK
code (Normally known to the Super User) or by a Service
User.
The default factory Service User PIN code is ‘12345678’.
A blocked Service User PIN can be unblocked with a PUK
code or by a Service User.
Normally the Service User PUK code is only known by
Thrane & Thrane A/S and/or the supplier.
6.3.4.1 Changing the Super User Pin
Use

or

to toggling between options.
• Select Service User from the main menu and press
.
• Type the Service User PIN code and press

to
enter the Service user menu.
• Select PIN Codes and press .
• Select SU PIN and press

.
• Press

to change the PIN.