Installation manual

Unit Installation Transceiver Unit
Apr 2004 15
4
4 Transceiver Unit
4.1 Unit Installation
To ensure adequate cooling of the transceiver unit a 5 cm
unobstructed space must be maintained around all sides of
the unit (except the bottom side).
The unit is manufactured as a cabinet for bulkhead or
desktop installation. The cabinet is equipped with two
mounting brackets, which makes it possible to secure the
unit on a bulkhead, cf. Appendix C.2 “Outline Dimensions”.
NOTE: It is very important that the unit is placed in an area
where access to the hull or equivalent grounding can be
reached within 0.5 m
.
The TT-3038G must be placed with a minimum safe
distance of at least 0.1 m to magnetic steering compass.
4.2 Connecting Power
The length of the Transceiver Unit power cable depends on
the type of cable used and the source impedance of the
ship 24 VDC supply.