Instruction manual

Operation and function

BEEM - Elements of Lifestyle

NOTE

To remove the lid, ﬁrst turn the lid in anti-clockwise direction

►

towards the symbol to unlock the lid and then simply lift

off the lid.

NOTE

The lid locking device is installed only on the model series

►

3005, 3006 and 3008.

Switch on appliance

Fill the water tank with the required amount of water, but not u

higher than the Max. mark on the tank.

Place the lid onto the water tank (see chapter

u Close water

tank with lid).

Place the teapot on the water tank.

NOTE

Ensure that the rotary knob is turned completely in anti-

►

clockwise direction. Only then insert the plug into the plug

socket.

Turn the rotary knob in clockwise direction until the desired u

setting is reached.

The thermostat permits a stepless setting of the water tempera-

ture. You have the choice between the following settings: warm,

hot, boiling (intermittent boiling).

Warm/hot

If you turn the rotary knob to position or , the water will

be heated to the corresponding temperature and then held at this

temperature.

Boiling

If you turn the rotary knob completely in clockwise direction to po-

sition

, the water will be boiled quickly. If you leave the rotary

knob in this position, the water will boil continuously until it has

completely evaporated.