User manual

USER MANUAL FOR BEEM OUTDOORS, LLC. 20KW
SILENT STANDBY GENERATOR SET
9
● Remove the shipping frame and attach the 4 foot supports.
● Put the unit on the permanent surface.
● Adjust the height of the 4 outriggers to make the generator unit level and steady
where it cannot be rocked back and forth or to one side or the other.
NOTE: If the generators is to be used where placed for a long-time, remove or
do not use the outriggers and place the metal generator frame directly on the hard
flat surface.
Ⅲ. Installation of Generator
When ready to install the generator, make sure the installation requirements meets
the following:
1. Installation Location
● Never install the generator in an enclosed room or an area where the engines
exhaust are free to enter a living area in your home, your neighbors home or
business.
● Exhaust gas can be deadly to humans, pets, and plants if inhaled or prolonged
exposure.
● If the unit is to be installed above ground level, make sure safe and sturdy access
is available completely around the generator unit in the event service or possible
component replacement is required after the installation. Not having clear safe
access could prohibit future service requirements from taking place.
Foot support
installation hole
Lifting ring
installation hole