User Manual

6
GAS SPECIFICATIONS
GAS SPECIFICATIONS
GAS TYPE
NATURAL
GAS
UNIVERSAL
LPG
PROPANE
Maximum gas
consumption
67�2 MJ/h 64�0 MJ/h 71�0 MJ/h
Injector office
diameter
1�75mm 0�90mm 0�95mm
Number of
injectors
6 6 6
Regulator
pressure
1�00 kPa 2�75 kPa 2�75 kPa
NOTES:
• This appliance MUST be installed and serviced only by a
qualified licensed person�
• This product is intended for outdoor use only�
• This product must be installed as per the instructions
which requires the installation of venting to enable
the barbecue to operate correctly� Failure to provide
adequate ventilation for supply of air to the appliance
may result in poor burner performance or excessive
heat build-up within the mounting enclosure�
• Ventilation holes in the unit must not be obscured by the
installation�
Natural gas installation
This barbecue is set up for Natural Gas and is labelled
accordingly� A Universal LPG and Propane conversion kit is
included if required�
Connecting the appliance to an NG gas supply
Componets supplied in a bag for NG are:
• 1 x Natural gas regulator
• Natural gas installation pipe
• 2 x sealing washers
1� Fitting the Natural Gas installation
• Fit the pipe ensuring the blue sealing washer is in
place� Do not over-tighten�
2� Fitting the regulator
• Fit the regulator ensuring the blue sealing washer
is in place and the arrow indicating gas flow is
correct� Do not over-tighten�
3� Fit the hose
• Connect to consumer piping
- The NG regulator inlet has a 1/2” parallel pipe thread�
- The inlet of the NG regulator may be connected to
consumer piping using a suitable hose assembly if
required�
408mm
46mm
137mm
Preparing the unit for Natural Gas connection to mains
Natural gas connection to be made by a licenced gas fitter�
Regulator – ensure
arrow is pointing in the
right direction
Consumer piping
Sealing washer
Natural Gas
installation pipe
Barbecue gas inlet
Sealing washer