User Manual

34 ASSEMBLING THE BARBECUE
41
Turn to lock the
gas bottle tray
Leak test procedure
• Ensure all gas valves are in the ‘OFF’ position.
• In a small container, mix a solution of water and
detergent or soap.
• After connection of the hose, turn on the gas supply
at the gas bottle.
• Using a brush, apply the solution to all gas
connection points and look for bubbles forming.
• Bubbling will indicate a leak.
• Turn off the gas supply and re-tighten the joint.
Repeat the leak test.
• If the leak persists, turn off the gas at the bottle and
contact a licensed gas fitter to correct.
BMF7645SA & BMF7655SA ASSEMBLY