STAND Assembly Instructions FOR OUTDOOR USE ONLY
Content: Index Description 1 2 3 4 5 6 7 8 9 10 11 Leg Top Connecting Panel Front Shelf Brackets Wheel Bracket Cylinder Hook Silicone Feet Wire Shelf Wheel Shaft Hub Caps Cylinder Shield A A1 B C D E F Fasteners Screw , 16mm (black) Screw , 25mm (stainless Steel) Spring Washer Screw, 8mm Circlip Plastic Washer Alan Key 2 Quantity 2 1 1R + 1L 1R + 1L 1 4 1 2 2 2 1 20 4 24 6 2 6 1
ASSEMBLY: 1. Assemble Front leg: [ 4 x A, 4 x B ] Place the Leg (1) on a padded flat, level surface and assemble the two Front Shelf Brackets (3). Insert two Silicone Feet (6) to the bottom hole, and pull until rest against bottom of leg. 2. Assemble Back leg: [ 8 x A, 8 x B ] Place other Leg (1) on a padded flat, level surface and assemble the Wheel Brackets (4) and Cylinder Hook (5). Insert two Silicone Feet (6) to the bottom hole, and pull until rest against bottom of leg.
3. Assemble Stand: [ 8 x A, 8 x B ] Attach the Top Connecting Panel (2) with four screws to the Front Leg and four more screws to the Back leg: 4. Assemble the wheels: [2 x D] Wheels (8) are placed on the inside of brackets. Insert the shaft (9) from the Wheel Bracket side inwards, and lock with a Circlip. The Circlip is to slide into the groove made in the shaft. Press the Hub-Cap (10) to place.
. Fit the Wire Shelf [ 4 x A1, 4 x B ] The Wire Shelf (7) has two plates, and two hooks. The hooks are facing forward, and will engage into the Front Shelf Brackets (3) assembled in step 1. The plates have two holes each through which screws go into Back Leg: 6. Place the Cylinder Shield [ 6 x C, 6 x E ] The Cylinder Shield (11) is attached to the rear leg by six screws and washers, three each side.
7. Position the Barbecue into Stand, and lock: With the stand standing on a stable, flat surface, remove the Locking U Bolt from the rear of the Barbecue, and place the Barbecue onto the stand, ensuring each leg is fully engaged into the corresponding recess in the stand. Once the Barbecue is placed correctly over the stand, ensure the Grease-Tray is in its place under the Barbecue, and fully engage the Locking U Bolt back to its place.
For your records: Model Number: __________________________________________________________________________________________________________________________________________________________________________________________ Date of Purchase: __________________________________________________________________________________________________________________________________________________________________________________________ Place where purchased: _______________________________________________________________
Woodland Home Products 3-5 Birmingham Av, Chester Hill, NSW, Australia, 2162 Phone: 1800 356 660 Facsimile: 02 9724 8899 E-mail: mail@beefeaterbbq.com Website: www.beefeaterbbq.com USA Toll Free: 1866 550 2333 Bugg_Sta_Ins_Au_V0.
