User Manual

3
HOUSEHOLD USE ONLY
NORTH AMERICAN MODELS WITH POLARIZED PLUGS:
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THANTHE OTHER). TO
REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED
OUTLET ONLY ONE WAY IF THEPLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE
PROPER OUTLET.
1. Plug into any 120 volt AC electrical outlet and turn the switch to the ON
position.
2. Place heating pad on the desired location with the lighter grey fabric
against body.
3. Select desired heat and/or massage level. To turn OFF, scroll through the
remaining heat and/or massage settings by pressing the buttons
sequentially, until LED indicator turns off.
4. Wait for the pad to heat up.
5. Avoid sitting on or crushing pad. Avoid folding during use.
INSTRUCTIONS
RESET INSTRUCTIONS
If your heating pad unexpectedly shuts off (not including the
Auto-Off setting feature), follow these steps:
1.Unplug the unit.
2.Wait 3 minutes.
3.Plug unit in and operate normally.