User Manual

Table Of Contents
DTC indicator and warning
light remains on.
The DTC function is switched
off.
Switch on DTC
Press and hold button 1
until the DTC indicator light
changes its status.
The DTC system status OFF!
is displayed immediately after
pressing the button 1.
DTC indicator and warn-
ing light goes out; if self-
diagnosis has not completed, it
starts to flash.
Possible DTC system status ON
is displayed.
Release button 1 once the
status has changed.
DTC indicator and warning
light remains off or contin-
ues to flash.
The new DTC system status ON
is displayed briefly.
The DTC function is switched
on.
You also have the option of
switching the ignition off and
then on again.
An DTC fault has oc-
curred if the DTC indic-
ator and warning light shows
when the motorcycle accel-
erates to a speed in excess
of the minimum stated below
after the ignition was switched
off and then on again.
min 5 km/h
See the section entitled "En-
gineering details" for more in-
formation on Dynamic Traction
Control:
How does Dynamic Traction
Control work? ( 166)
Riding mode
Using the riding modes
BMW Motorrad has developed
operational scenarios for your
motorcycle from which you can
select the scenario suitable for
your situation:
4
68
z
Operation