User Manual

Possible cause:
DTC self-diagnosis not
completed
The DTC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed with the en-
gine running for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. Bear in mind
that the DTC function is not
available until self-diagnosis has
completed.
DTC switched off
DTC indicator and warning
light comes on.
Off!
Traction control de-
activated.
Possible cause:
The rider has switched off the
DTC system.
Switch on DTC ( 68).
DTC fault
DTC indicator and warning
light comes on.
Traction control
failure! Riding
at mod. speed pos.
Ride carefully to next
specialist workshop.
Possible cause:
The DTC control unit has detec-
ted a fault.
ATTENTION
Damaged components
Damage to sensors, for example,
which causes malfunctions
Do not transport any objects
underneath the driver or pas-
senger seat.
Secure the toolkit.
Do not damage the angular
rate sensor.
Bear in mind that the DTC
function is not available or the
functionality is subject to cer-
tain restrictions.
You can continue to ride. Take
note of the more detailed in-
formation on situations that can
lead to a DTC fault ( 166).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.
DTC restricted
DTC indicator and warning
light comes on.
3
53
z Status indicators