User Manual
Table Of Contents
- Rider's manual S 1000 RR
- General instructions
- General views
- Status indicators
- Operation
- Ignition switch/steering lock
- Emergency off switch (kill switch)
- Intelligent emergency call
- Lights
- Hazard warning lights system
- Turn indicators
- Dynamic Traction Control (DTC)
- Riding mode
- Cruise-control system
- Hill Start Control
- Gearshift light
- Anti-theft alarm (DWA)
- Tyre pressure monitoring (RDC)
- Heated handlebar grips
- On-board computer
- Front and rear seats
- TFT display
- Adjustment
- Riding
- On the race track
- Displays for racing
- LAPTIMER
- Vehicle settings for racing
- RACE PRO riding modes
- Launch Control
- Pit Lane Limiter
- DTC
- Chassis and suspension settings for racing
- Removing and installing mirrors
- Removing and installing number-plate carrier
- Switching off ABS when riding on the race track
- Deactivating intelligent emergency call when riding on the race track
- Gearshift-pattern reverser
- Engineering details
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
The Bluetooth connection is not established.
Possible cause Rectification
The steps required for pairing were not carried
out.
Check the necessary steps for pairing in the oper-
ating instructions for the communication system.
Connectivity functions are deactivated because
the race track functions are activated.
Go to Settings menu and deactivate
Racetrack.
The communication system was not connected
automatically despite successful pairing.
Switch off the helmet's communication system
and reconnect it after a minute or two.
Too many Bluetooth devices are saved on the
helmet.
All pairing entries on the helmet are deleted (see
the communication system operating instructions).
There are other vehicles with Bluetooth-capable
devices in the vicinity.
Avoid simultaneously pairing with more vehicles.
Bluetooth connection is interrupted.
Possible cause Rectification
The Bluetooth connection to the mobile end
device is interrupted.
Switch off energy saving mode.
The Bluetooth connection to the helmet is inter-
rupted.
Switch off the helmet's communication system
and reconnect it after a minute or two.
The volume in the helmet cannot be adjusted. Switch off the helmet's communication system
and reconnect it after a minute or two.
13
225
z
Technical data