User Manual
Table Of Contents
- Rider's manual S 1000 RR
- General instructions
- General views
- Status indicators
- Operation
- Ignition switch/steering lock
- Emergency off switch (kill switch)
- Intelligent emergency call
- Lights
- Hazard warning lights system
- Turn indicators
- Dynamic Traction Control (DTC)
- Riding mode
- Cruise-control system
- Hill Start Control
- Gearshift light
- Anti-theft alarm (DWA)
- Tyre pressure monitoring (RDC)
- Heated handlebar grips
- On-board computer
- Front and rear seats
- TFT display
- Adjustment
- Riding
- On the race track
- Displays for racing
- LAPTIMER
- Vehicle settings for racing
- RACE PRO riding modes
- Launch Control
- Pit Lane Limiter
- DTC
- Chassis and suspension settings for racing
- Removing and installing mirrors
- Removing and installing number-plate carrier
- Switching off ABS when riding on the race track
- Deactivating intelligent emergency call when riding on the race track
- Gearshift-pattern reverser
- Engineering details
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
Care products
BMW Motorrad recommends
that you use the cleaning
and care products you can
obtain from your authorised
BMW Motorrad Retailer. The
substances in BMW Care
Products have been tested in
laboratories and in practice;
they provide optimised care and
protection for the materials used
in your vehicle.
ATTENTION
Use of unsuitable cleaning
and care products
Damage to vehicle parts
Do not use solvents such as
cellulose thinners, cold clean-
ers, fuel or the like, and do
not use cleaning products that
contain alcohol.
Washing the vehicle
BMW Motorrad recommends
that you use BMW insect re-
mover to soften and wash off
insects and stubborn dirt on
painted parts prior to washing
the vehicle.
To prevent stains, do not wash
the vehicle immediately after it
has been exposed to strong sun-
light and do not wash it in the
sun.
Make sure that the vehicle is
washed frequently, especially
during the winter months.
To remove road salt, clean the
motorcycle with cold water im-
mediately after every trip.
WARNING
Wet brake discs and brake
pads after vehicle wash, after
riding through water and in
rainy conditions
Diminished braking effect, risk of
accident
Apply the brakes in good time
to allow the friction and heat to
dry the brake discs and brake
pads.
ATTENTION
Effect of road salt intensified
by warm water
Corrosion
Use only cold water to wash off
road salt.
ATTENTION
Damage due to high water
pressure from high pressure
cleaners or steam cleaners
Corrosion or short circuit, dam-
age to labels, seals, hydraulic
brake system, electrical system
and the motorcycle seat
12
218
z
Care