User Manual
Table Of Contents
- Rider's manual S 1000 RR
- General instructions
- General views
- Status indicators
- Operation
- Ignition switch/steering lock
- Emergency off switch (kill switch)
- Intelligent emergency call
- Lights
- Hazard warning lights system
- Turn indicators
- Dynamic Traction Control (DTC)
- Riding mode
- Cruise-control system
- Hill Start Control
- Gearshift light
- Anti-theft alarm (DWA)
- Tyre pressure monitoring (RDC)
- Heated handlebar grips
- On-board computer
- Front and rear seats
- TFT display
- Adjustment
- Riding
- On the race track
- Displays for racing
- LAPTIMER
- Vehicle settings for racing
- RACE PRO riding modes
- Launch Control
- Pit Lane Limiter
- DTC
- Chassis and suspension settings for racing
- Removing and installing mirrors
- Removing and installing number-plate carrier
- Switching off ABS when riding on the race track
- Deactivating intelligent emergency call when riding on the race track
- Gearshift-pattern reverser
- Engineering details
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
Specified level for
coolant
Between MIN and MAX
marks on the expansion tank
(cold engine)
If the coolant drops below the
permitted level:
Top up the coolant.
Top up coolant
Open cap 1 of the expansion
tank.
Top up coolant to the specified
level using a suitable funnel.
Check coolant level ( 187).
Close the cap 1 of the expan-
sion tank.
Tyres
Checking tyre pressure
WARNING
Incorrect tyre pressure
Impaired handling characteristics
of the motorcycle, shorter useful
tyre life
Always check that the tyre
pressures are correct.
WARNING
Tendency of valve inserts to
open by themselves at high
riding speeds
Sudden loss of tyre pressure
Install valve caps fitted with
rubber sealing rings and tighten
firmly.
Place the motorcycle on its
stand on firm, even ground.
Check tyre pressures against
the data below.
Tyre pressure, front
2.5 bar (One-up, with cold
tyre)
10
188
z
Maintenance