User Manual
Table Of Contents
- Rider's manual S 1000 RR
- General instructions
- General views
- Status indicators
- Operation
- Ignition switch/steering lock
- Emergency off switch (kill switch)
- Intelligent emergency call
- Lights
- Hazard warning lights system
- Turn indicators
- Dynamic Traction Control (DTC)
- Riding mode
- Cruise-control system
- Hill Start Control
- Gearshift light
- Anti-theft alarm (DWA)
- Tyre pressure monitoring (RDC)
- Heated handlebar grips
- On-board computer
- Front and rear seats
- TFT display
- Adjustment
- Riding
- On the race track
- Displays for racing
- LAPTIMER
- Vehicle settings for racing
- RACE PRO riding modes
- Launch Control
- Pit Lane Limiter
- DTC
- Chassis and suspension settings for racing
- Removing and installing mirrors
- Removing and installing number-plate carrier
- Switching off ABS when riding on the race track
- Deactivating intelligent emergency call when riding on the race track
- Gearshift-pattern reverser
- Engineering details
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
Engine oil, capacity
SAE 5W-40, API SJ /
JASO MA2, Additives (e.g.
molybdenum-based) are
not permissible because
they can attack coated
components of the engine,
BMW Motorrad recommends
BMW Motorrad ADVANTEC
Ultimate oil.
approx. 4.5 l (with filter
change)
If the oil level is below the min-
imum mark:
Topping up the engine oil
( 181).
If the oil level is above the max-
imum mark:
Have the oil level corrected
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Topping up the engine oil
Place the motorcycle on its
stand on firm, even ground.
Wipe the area around the oil
filler opening clean.
Remove cap 1 of the oil filler
opening.
ATTENTION
Use of insufficient engine oil
or too much engine oil
Engine damage
Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Checking engine oil level
( 179).
Fit cap of the oil filler open-
ing 1.
Brake system
Checking function of
brakes
Operate brake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.
If pressure points are not clearly
perceptible:
ATTENTION
Work on brake system not
in compliance with correct
procedure
Risk to operational reliability of
the brake system
10
181
z
Maintenance