User Manual
Table Of Contents
- Rider's manual S 1000 RR
- General instructions
- General views
- Status indicators
- Operation
- Ignition switch/steering lock
- Emergency off switch (kill switch)
- Intelligent emergency call
- Lights
- Hazard warning lights system
- Turn indicators
- Dynamic Traction Control (DTC)
- Riding mode
- Cruise-control system
- Hill Start Control
- Gearshift light
- Anti-theft alarm (DWA)
- Tyre pressure monitoring (RDC)
- Heated handlebar grips
- On-board computer
- Front and rear seats
- TFT display
- Adjustment
- Riding
- On the race track
- Displays for racing
- LAPTIMER
- Vehicle settings for racing
- RACE PRO riding modes
- Launch Control
- Pit Lane Limiter
- DTC
- Chassis and suspension settings for racing
- Removing and installing mirrors
- Removing and installing number-plate carrier
- Switching off ABS when riding on the race track
- Deactivating intelligent emergency call when riding on the race track
- Gearshift-pattern reverser
- Engineering details
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
NOTICE
Use the M Cover Kit from
BMW Motorrad to cover the
resulting opening.
Carefully clip in left and right
rear trim panel 1, first vertic-
ally 2, then horizontally 3.
Carefully clip in rear trim panel
in the direction of arrow.
Install bolts 1 and 2.
with two-up riding package
OE
Install the rear seat ( 80).
Installing tail-hump cover
( 80).
Installing number-plate
carrier
Place the motorcycle on its
stand on firm, even ground.
with two-up riding package
OE
Removing rear seat ( 80).
Remove tail-hump cover
( 79).
Remove screws 1 and 2.
Unclip left and right rear trim
panels carefully in the direc-
tion of arrow.
8
153
z
On the race track